INKBIRD is a smart home living brand that is dedicated to the IoT (Internet of Things) industry. Founded in 2010 by two kite-chasing boys, INKBIRD has been dedicated to bringing the full power of technologies to home living. Human civilization began with the development of the quill pen, and communication was exciting.
ITC-308
The ITC-308 temperature controller is an easy-to-use tool for monitoring temperature in a refrigeration or heating system. This device displays temperature in Fahrenheit or Celsius. The LCD screen makes the device easy to use. You can program it to automatically control your system for the desired temperature.
The Inkbird ITC-308 is designed to be plug-and-play and ready to use right out of the box. It is also easy to store and move around. It comes with two displays: a digital display that shows the measured temperature and a digital display that displays the temperature you set.
The Inkbird ITC-308 is WiFi enabled. You can download the Inkbird app from the App-Store or Play-Store. It has the highest rating on both stores. Be sure to start the application in “setup” mode when first plugging it in. After this, you need to connect to the Inkbird cloud service.
The ITC-308 temperature controller from Inkbird is a popular choice among homebrewers. It is a reliable and efficient temperature controller, featuring independent settings for heating and refrigeration. The device is simple to use and comes with an easy-to-follow manual. Its wireless connectivity lets you access the device from any smartphone or tablet.
The ITC-308 is available in two models, the original and the Wi-Fi version. It can be used to monitor and control devices, including kegerators and fermentation chambers. It can also be used to regulate temperature of your brew system. It monitors the temperature and cycles on and off as necessary to keep it at a consistent temperature. Aside from temperature control, it can also be used for temperature calibration.
The ITC-308 thermostat from Inkbird offers a wide variety of features. It can be programmed to start heating your plants as low as -10degC and shut off heating them at -7degC. It can also be set to send notifications when the temperature falls below the desired level.
ITC-306T
The INKBIRD ITC-306T has a temperature controller built in, allowing you to easily set individual temperature limits for day and night. It also supports temperature alarms and sensor faults. These features make the ITC-306T safer for plants and creatures. The device is easy to set up right out of the box, and will work with most heaters.
ITC-380S
The ITC-380S digital dual stage temperature controller is a good option for the home or office. It has a clear display and allows simultaneous connection to both heating and refrigeration equipment. It is safe and reliable, with plenty of built-in features including alarms and compressor delay protection. This model comes with an instruction manual. It has multiple settings, including a low and high temperature alarm and a sensor fault alarm.
The Inkbird ITC-380S temperature controller is designed to be easy to use and has a powerful output power of 1,000W(110V) or 2,000W(220V). This controller has a plug and play design and is easy to move. It has a temperature probe that you can easily remove and replace.
